EN 12390-4 and EN 772-1 EN SEMI-AUTOMATIC Compression Testing Frame for Masonary Units, Cubes and Cylinders

Request Catalog

Product Code

UTS-5729.SLP	2000 kN EN 12390-4 and EN 772-1 Semi-Automatic Compressıon Testıng Machines for Masonary Units, Cubes and Cylinders
UTC-5739.SLP	3000 kN EN 12390-4 and EN 772-1 Semi-Automatic Compressıon Testıng Machines for Masonary Units, Cubes and Cylinders
UTC-0210	High Precision Pressure Transducer and Electronic
UTC-4682E	Pedestal for EN 1550 kN, 2000 kN, 2200 kN and 3000 kN Compression Testing Frames with Welded Walls

Models for 220-240V 50-60 Hz, 1ph	UTC-5729.SLP	UTC-5739.SLP
Models for 110-120V 60 Hz, 1ph	UTC-5729.SLP-N	UTC-5739.SLP-N

Standards

EN 12390-4, EN 12390-3, EN 772-1

UTC-5729.SLP and UTC-5739.SLP models Semi-Automatic Compressıon Testıng Machines are manufactured for compression testing of masonary units, cubes and cylinders acc. to EN standards. These machines also meet the requirements of CE norms with respect to the health and safety of the operator. And their user-friendly design enable an inexperienced operator to perform the test.

The machines are supplied with factory calibration certificate for force transfer stability and the self-alignment of the upper loading platen conforming to EN 12390-4.

The Semi-Automatıc Compression Machines consist of a welded frame ( see table), hydraulic power pack (UTC-4820) with LPI battery operated digital readout unit (UTC-UTC-4920LP).

UTC-4682E Pedestal that is made of steel to facilitate the user’s placement of specimens in the frame for compression test should be ordered separately.

Main Features

Class A starting from with the 5% of the machine capacity, (Special calibration option starting from 1% of the full range with UTC-0210)
1 channel with two different calibration table, test parameters and specimen information (by changing the sensor belong to other frame, the unit can be control for second test frame)
Multi-point calibration
Real time numeric display of load and load pressure
Peak hold property
Supplied with factory calibration certificate for force transfer stability and the self-alignment of the upper loading platen conforming to EN 12390-4
Welded steel walled frame with lower and upper (shperically-seated) loading platens
Load measurment with a pressure transducer
Hydrolic pump with dual stage for rapid approach
RS232 Serial port for PC or thermal or dot matrix printer
Free of charge Utest software for compression/flexture testing machines(USOFT-4820.SLP) for compression, flexture, splitting tensile strength tests of construction materials such as concrete, cement, brick/masonary units

Safety Features

Maximum pressure valves to avoid machine overloading
Limit switch for piston stroke
Removable transparent front and rear safety doors
The front safety doors have an automatic safety device to stop the machine if the door is opened during a test.

EN 12390-4 and EN 772-1 EN SEMI-AUTOMATIC COMPRESSION TESTING MACHINES FOR MASONARY UNITS, CUBES AND CYLINDERS
Models	UTC-5729.SLP	UTC-5739.SLP
Product Photo
Capacity	2000 kN	3000 kN
Frame Type	Welded Steel	Welded Steel
Lower Bearing Block, Dimensions (D)	310x510x50 mm	310x510x50 mm
Upper Bearing Block, (With Spherically Seating Assembly ) Dimensions (C)	310x510x50 mm	310x510x50 mm
Surface Hardness of Bearing Blocks	55 HRC	55 HRC
Flatness Tolerance	0,03 mm	0,03 mm
Piston Diameter	250 mm	300 mm
Piston Stroke	50 mm	50 mm
Maximum Vertical Clearance Between Bearing Blocks (E)	330 mm	330 mm
Horizontal Clearance (B)	360 mm	415 mm
Sizes of Specimens For Cylinders (up to)	Ø160x320 mm	Ø160x320 mm
Sizes of Specimens For Cubes (up to)	300 mm (**)	300 mm (**)
Sizes of Specimens For Masonary Units (up to)	300x500 mm (**)	300x500 mm (**)
Power	550 W	550 W
Oil Capacity	20 L	20 L
Maximum Working Pressure	410 Bar	410 Bar
Dimensions (wxlxh) (Axd*xF)	740x550x1040 mm	805x550x1145 mm
Weight	885 kg	1185 kg
Pedestal (Optional )	UTC-4682	UTC-4682
	(d) depth () Limited by capacity of the frame The machines for masonary units, cubes and cylindrs are supplied complete with;* • 100 mm, 50 mm, 2x30 mm height x Ø205 mm distance pieces • Fixture for Centering Specimens, compatible with 310x510x50 mm lower loading platen for 100mm and 150mm cubes, Ø100mm and Ø150mm cylinders(UTC-4626E) • Scissor Jack for Loading Platens/Bearing Blocks, (UTC-4629 • Removable transparent front and rear safety doors. Appropriate Distance piece/s for the cylinder and cube specimens with the height of lower than 150mm should be ordered separately.