Deep Scanning Metal Locator
Product Code
|
UTC-3015 |
Deep Scanning Metal Locator |
UTC-3015 Deep Scanning Metal Locator is used to find rebar and metalic pipes, conduit, metal studs, junction boxes and metal framing up to 150 mm deep by scanning through most nonmetallic construction material, including solid concrete.
It scans through solid concrete and pinpoints the location and depth of target and differentiates between steel rebar and copper pipe.
Technical Specifications
|
Battery |
9 V alkaline |
|---|---|
|
Position Accuracy |
Rebar/Copper pipe 14 mm dia. at a minimum grid spacing of 152 mm are located typically within 13 mm depth |
|
Depth |
Up to 152±25 mm |
|
Water Resistance |
Splash and water resistance but not water proof |
|
Dimensions |
251x109x63 mm |
|---|---|
|
Weight (approx.) |
320 g (incl. battery) |
-
CONCRETE
- AUTOMATIC - ASTM & AASTHO Compression Testing Machines
- AUTOMATIC - EN Compression Testing Machines
- EN 12390-4 Automatic Compression Testing Machines with Welded Walls for Cubes and Cylinders
- EN 12390-4 Automatic Four Column Compression Testing Machines for Cubes and Cylinders
- EN 12390-4 - EN 772-1 Automatic Compression Testing Machines with Welded Walls for Masonary Units, Cubes and Cylinders
- EN 12390-4 - EN 772-1 Automatic Four Columns Compression Testing Machines for Masonary Units, Cubes and Cylinders
- EN 772-1 and General Purpose Automatic Compression Testing Machines for Masonary Units/Blocks, Cylinders And Cubes
- AUTOMATIC - GENERAL Compression Testing Machines
- U-Touch PRO Control Unit for Automatic Concrete&Cement Compression/Flexure Testing Machines
- UTEST SOFTWARE for Automatic Concrete&Cement Compression/Flexure Testing Machines
- ACCESSORIES for Compression Testing Machines
- SEMI-AUTOMATIC - ASTM & AASTHO Compression Testing Machines
- SEMI-AUTOMATIC - EN Compression Testing Machines
- EN 12390-4 EN SEMI-AUTOMATIC Compression Testing Machines for Cubes and Cylinders
- EN 12390-4 and EN 772-1 EN SEMI-AUTOMATIC Compression Testing Frame for Masonary Units, Cubes and Cylinders
- EN 772-1 and General Purpose Semi-Automatic Compressıon Testing Machines for Masonary Units/Blocks, Cylinders And Cubes
- SEMI-AUTOMATIC - GENERAL PURPOSE Compression Testing Machines
- LPI Battery Operated Digital Readout Unit
- MANUAL Compression Testing Machines
- ASTM & AASHTO - Compression Testing Frames
- EN - Compression Testing Frames
- EN 12390-4 Compression Testing Frames for Cubes and Cylinders
- EN 12390-4 Four Column Compression Testing Frames for Cubes and Cylinders
- EN 12390-4 and EN 772-1 Compression Testing Frames with Welded Walls for Cubes, Cylinders and Masonary Units
- EN 12390-4 and EN 772-1 Compression Testing Frames with Four Column for Cubes, Cylinders and Masonary Units
- EN 772-1 and General Purpose Compression Testing Frame for Masonary Units/ Blocks, Cylinders and Cubes
- GENERAL - Compression Testing Frames
- ACCESSORIES for Compression Frames
- Hydraulic Power Packs
- FLEXURAL Testing Frames
- AUTOMATIC & SEMI AUTOMATIC FLEXURAL Testing Machines
- Servo Controlled Universal Automatic Bending Test Machine
- Advanced Testing Systems
- ACCESSORIES for Flexural Testing Frames
- Workability & Consistency
- SCC - Workability & Consistency
- Density (Unit Weight) Measure
- Air Contents
- Mass Concrete Temparature Measurement
- Bleeding of Freshly Mixed Concrete
- Setting Time & Consistency Time
- Mixing Concrete in The Laboratory
- Concrete Moulds
- Concrete Compaction
- Concrete Curing
- Universal Coring Machines
- Universal Cutting Machine
- Grinding
- Capping
- Impermeability Test Sets
- Rapid Chloride Permeability Test
- Length Change of Hardened Concrete and Hydraulic-Cement Mortar
- Metal Location in Concrete
- Non-Destructive Concrete Testing in Structures
- Carbonation Test Set
- Measurement of Reinforcement Corrosion Rate
- Digital Bond Strenght /Pull-off Tester
- Digital Rebar Pull-Out Force Tester
- General Properties of U-Touch PRO Control Units
- General Properties of Utest USOFT Softwares
