EN 12390-4 EN SEMI-AUTOMATIC Compression Testing Machines for Cubes and Cylinders

Product Code

Standards

EN 12390-4, EN 12390-3

UTC-5727.SLP and UTC-5737.SLP models Semi-Automatic Compressıon Testıng Machines are manufactured for compression testing of cubes and cylinders acc. to EN standards.

These machines also meet the requirements of CE norms with respect to the health and safety of the operator. And their user-friendly design enable an inexperienced operator to perform the test.

The Semi-Automatıc Compression Machines consist of a welded frame (see table), hydraulic power pack (UTC-4820) with LPI battery operated digital readout unit (UTC-4920LP).

UTC-4682E Pedestal that is made of steel to facilitate  the user’s  placement of specimens in the frame for compression test should be ordered separately.

Main Features

• Class A starting from with the 5% of the machine capacity, (Special calibration option starting from 1% of the full range with UTC-0210)
• 1 channel with two different calibration table, test parameters and specimen  information (by changing the sensor belong to other frame, the unit can be control for second test frame)
• Multi-point calibration 
• Real time numeric display of load and load pressure
• Supplied with factory calibration certificate for force transfer stability and the self-alignment of the upper loading platen conforming to EN 12390-4
• Welded steel walled frame with lower and upper (shperically-seated) loading platens
• Load measurment with a pressure transducer
• Hydrolic pump with dual stage for rapid approach
• RS232  Serial port for PC or thermal or dot matrix printer
• Free of charge Utest software for compression/flexture testing machines (USOFT-4820.SLP) for compression, flexture, splitting tensile strength tests of construction materials such as concrete, cement, brick/masonary units

Safety Features

• Maximum pressure valves to avoid machine overloading
• Limit switch for piston stroke
• Removable transparent front and rear safety doors
• The front safety doors have an automatic safety device to stop the machine if the door is opened during a test.

USOFT-4820.SLP Test Software is improved for semi-automatic concrete compression and flexural testing machines with LPI Battery Operated Digital Readout Unit durring the test to collect and record data and to prepare the report containing the results obtained.Before the test, a PC which the Utest software is installed is connected to RS232 port of LPI reading unit, the data obtained in the test can be monitored and recorded in real time. The advanced functions for data base management provide an easy navigation of all saved data. Test report including the test results and user defined test information (names and the Company details, test type, specimen type, user info and other knowledge required) can be print out.