Digital Point Load Test Apparatus with Hydraulic Bottle Jack
Product Code
|
UTR-0540 |
Digital Point Load Test Apparatus with Manuel Hydraulic, Pomp and Hydraulic Cylinder 70 kN |
|
UTR-0544 |
Lower and Upper (Spherical Seated) Loading Platens, Ø52 mm |
|
UTR-0422 |
Indirect Tensile (Brazil) Test Apparatus for NX (Ø54.74 mm) Rock Specimens, ISRM |
|
UTR-0424 |
Indirect Tensile (Brazil) Test Apparatus for HQ (Ø63,5 mm) Rock Specimens, ISRM |
Standards
ASTM D5731, ISRM
The UTR-0540 Digital Point Load Test Apparatus is used for determining the strength values of a rock specimen, both in the field and in the laboratory.
Consists of a 70 kN capacity load frame with an upper and lower conical platens, a digital readout unit, pressure tranducer and a hydraulic loading bottle jack.
A ruler assembled on the frame allows the direct measurement of the distance between the conical platens before and after the test.
The compression load is measured by a pressure transducer connected to an advanced digital easily transportable wooden case.
UTR-0544 Loading platens for compression and indirect/splitting tensile tests on rock specimens should be ordered seperately.
Supplied complete with face protective goggles and carriage box. Loading platens set for compression and indirect/splitting tensile strength test should be ordered separately
SPECIFICATION
- Load Capacity : 70 kN
- Digital Display: 2 x 16 characters
- Resolution : 32.000 div.
- Accuracy : ± 1%
- Load Readibility: 1 N
- Serial Port for PC or thermal connection
- Distance between conical platens: 105 mm
- Distance between columns: 110 mm
- Distance between compression platens: 102 mm
|
Dimensions |
280x450x670 mm |
|---|---|
|
Weigth (approx.) |
40 kg |
