Three Gang Mould
Product Code
|
UTCM-0892.2 |
Three Gang Mould 40.1x40x160 mm, Steel, EN, Minimum Hardness HV200. |
|
UTCM-0892.4 |
Three Gang Mould 40.1x40x160 mm, Steel, EN, Minimum Hardness HV400. |
|
UTCM-0893 |
Feed Hopper for UTCM-0892 |
|
UTCM-0894 |
Short and Long Spreaders and Straightedge for UTCM-0892 |
|
UTCM-0895 |
Three Gang Cube Mould 50x50x50 mm, Steel, ASTM |
|
UTCM-0898 |
Three Gang Cube Mould, 2” Plastic |
|
UTCM-0899A |
Three Gang Mould 40x40x160 mm, Steel, ASTM |
|
UTCM-0926 |
Cube Mould 70.7 mm, Steel, for UTCM-0930, BS |
Standards
EN 196-1, 413-2, 459-2, 1744-1, 1015-10, 1015-11, 13454-2; ASTM C109, C348; BS 4550
All moulds have been manufactured from steel except UTCM-0898 molded using engineered plastic and all internal surfaces are machined.
Minimum surface hardness of UTCM- 0892.4 is HV400 which is recommended by the EN standard. All moulds surfaces are protected with anti-corrosion oil. The webs of UTCM- 0892.4 and UTCM-0899A are matchmarked.
Minimum surface hardness of UTCM-0892.2 is HV200.
|
|
Dimensions |
Weight (approx.) |
|---|---|---|
|
UTCM-0892.4 |
300x190x70 mm |
10,5 kg (Packed) |
|
UTCM-0893 |
210x200x40 mm |
1 kg |
|
UTCM-0895 |
110x230x60 mm |
3 kg |
|
UTCM-0898 |
110x250x70 mm |
1 kg |
|
UTCM-0899A |
300x190x70 mm |
12 kg (Packed) |
|
UTCM-0926 |
100x125x90 mm |
3,5 kg |
-
CEMENT
- Cement Samplers
- Le Chatelier Flask
- Soundness of Cement & Hydrated Lime
- Lenght Change (Shrinkage and Expansion)
- Fineness (Specific Surface)
- Heat of Hydration Calorimeter with High Resolution D. Th.
- Muffle Furnace
- Setting Time & Consistency
- Flow Table
- Workable Life, Stiffening Time & Setting Time
- Preparation of Mortar Prisms for Compression Tests
- Compression and Flexure Testing Frames
- Hydraulic Power Pack
- MANUEL Compression and Flexure Testing Machines
- SEMI-AUTOMATIC Compression and Flexure Testing Machines
- AUTOMATIC Compression and Flexure Testing Machines
- Jigs for Compression and Flexure Tests
- Building Lime, Grout and Mud Testing
