Skip to content Skip to navigation
logo
Utest Material Testing Equipment

Motorized Pendulum Impact Tester

Product Code

UTCI-0150           Motorized Pendulum Impact Tester, 150 Joules
UTCI-0155           Izod Hammer (Striker) & Specimen Holder (Vise)

Standards

ASTM E 23, EN 10045, ISO 148, GOST 9454; AS 1544; JIS Z 2242,B 7722

Impact test determines the amount of energy absorbed by a material during fracture. This absorbed energy is a measure of a given material's toughness and acts as a tool to study temperature-dependent brittle-ductile transition. It is to determine whether the material is brittle or ductile in nature.

UTCI-0150 motorized pendulum impact tester is high performance device and ideal for testing metals to Charpy and Izod standards at capacity of 150 Joules. Constructed with solid steel frames ,UTEST motorized pendulum impact testers are machines that you can trust and is safe, quick and easy to operate. It can be fitted with accessories for Charpy and Izod Tests. Each test requires a specific vice/fixture, specimen adapters, and hammers. Operation of the machine is controlled and test results are collected by using colored touch screen digital control unit. Test results such as energy absorbed calculated and displayed on the control unit.

With UTCI-0150 motorized pendulum impact tester, after the test, the pendulum is automatically captured and returned to the starting position. This feature enables the starting angle setting to be varied and optimum test parameters such as impact speed and energy loss on impact to be determined.

Universities, laboratories of the institutions, automotive and aero companies, research and R&D Labs, as well as steel plants are typical customers for these kinds of testing systems.

MAIN FEATURES

  • Available energy is 150J of Charpy and Izod testing
  • Motor-driven raising of hammer with auto-return after test for increased productivity and operator safety
  • Electromagnetic brake/clutch control mechanisms respond quickly for improved operation
  • Conveniently located controls for efficient testing
  • Clearance between supports of 40 mm,
  • Fall angle is 150 degree,
  • Suitable for specimens of 10 x 10 x 55 mm
  • Cabin door sensitive automatic testing mode that enables the fast and continuous testing and manuel mode for more control for the operator.
  • Highly senstive encoder to take the angle readings for every position of the hammer and to capture the very peak point of the rise angle.
  • Direct verification menu to verify the losses and calculate the error as described in the standarts (air resistance, bearing resistance, etc.).

STANDARDS FOR UTCI SERIES

  • ASTM E23 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
  • EN 10045 Charpy Impact Test on Metallic Materials
  • ISO 148 Metallic Materials - Charpy Pendulum Impact Test
  • GOST 9454 Impact Bending Test Method at Low, Room and High Temperatures
  • Fixtures/strikers are available for each test standard as well as customized tests.

Max. Absorbed Impact Energy (J)

150

Raised Angle

150°

Max. Impact Speed (m/s)

5,25

Standard span (mm)

40

Size of specimen (mm)

10 x 10 x 55

Round angle of jaws (mm)

R1-1.5

Round angle of striking edge (mm)

R2-2.5

Power supply

3phs, 380V, 50Hz or 1phs, 220V,60Hz

Overall Dimensions

2200x950x2100 mm 

Weight ( approx. )

800 kg

Main Accessories

  1. Pendulum (needed capacity),
  2. Specimen centering plate (U, V)
  3. Anchor bolts (M22x300mm): 4 pcs
  4. Safety closure

Optional Accessories

  1. Full close Aluminum alloy safe cabin,
  2. ASTM E23 striking edge (R8mm),
  3. Self centering tong for setting charpy test specimen
  4. Anvils and pendulums for Charpy, Izod and tensile impact testing,
  5. Temperature Chamber for impact specimen,
  6. Notch Cutter for impact specimen
  7. Low Temperature Freezers for impact specimens.
MANUAL / HYDRAULIC NOTCH CUTTER FOR IMPACT SPECIMEN

Product Code

UTCI-0500           Manuel Notch Cutter for Impact Specimen

UTCI-0500/V      V Type Notch Knife for UTCI-0500

UTCI-0500/U     U Type Notch Knife for UTCI-0500

UTCI-0520           Hydraulic Notch Cutter for Impact Specimen

Manual / Hydraulic Notch Cutter for Impact Specimen is specially designed for specimen preparation for impact specimen. Both manual type and hydraulic type are available to cut the notch according to the ‘V’ ASTM E23, ISO148 standards, ‘U’ DIN 50115 and ISO83 standards ‘Charpy Notch Impact Test Method for Metal Material’. Meanwhile, the machine also features in high precision, long life, low noise and concise appearance etc.

UTCI-0500 Manuel Notch Cutter for Impact Specimen is supplied complete with V Type or U Type Notch Knife. The second type knife should be ordered seperately.

UTCI-0520 Hydraulic Notch Cutter for Impact Specimen is supplied complete with V Type and U Type Notch Knifes.

Specifications

Notch type                        : V type: 2 mm or U type: 2 mm

Size of specimen             : 10×10 (7.5 or 5) ×55mm

Travel of cutting knife    : 340mm

Cutting speed                   : 2.5m/min (hydraulic type)

Dimensions                       : 400x350x700/600x500x1200mm

Weight                                : 100/200kg     

CI SERIES TEMPERATURE CHAMBER FOR IMPACT SPECIMEN

Product Code

UTCI-0003  Temperature chamber for impact specimen, temperature range: room to -30°C
UTCI-0006  Temperature chamber for impact specimen, temperature range: room to -60°C
UTCI-0008  Temperature chamber for impact specimen, temperature range: room to -80°C
UTCI-0010  Temperature chamber for impact specimen, temperature range: room to -100°C

CI Series Temperature Chamber for impact specimenis designed according to the standard of 'Charpy Notch Impact Test Method for Metal Materials'. It adopts compressor-cooling technology. The machine is available in two types, low temperature grade and high temperature grade. It utilizes the heat balance principle and cycle-stirring method to realize the constant temperature cooling for impact specimen with a reliable performance.

 

UTCI-0003

UTCI-0006

UTCI-0008

UTCI-0010

Temperature range (0C)

Room to -30

Room to -60

Room to  - 80

Room to  -100

Accuracy (0C)

≤±0,5

Effective working space (mm)

120x120x80

Specimen Dimensions (mm)

10x10x55

Specimen quantity (mm)

More than 60 pcs

Cooling media

Alcohol or others

Power supply (kW)

1

1,5

1,5

2

Dimensions (mm)

800x510x480

800x510x750

800x510x480

1200x700x800

NON METALLIC SPECIMEN PREPARATION EQUIPMENTS

Sheet Punching Machine

Product Code 

UTCI-0050   Sheet Punching Machine

This machine is used for machining test samples, such as nonmetallic soft sheets and thin films. Using various kinds of standard cut-off knives, it can accurately and swiftly work out the required samples.

  • Max. travel: 25mm
  • Max. thickness of punching: 2 mm

Notch Sampling Machine

Product Code:

UTCI-0060  Notch Sampling Machine

Specimen prepared by UTCI-0060 Notch Sampling Machine confirms to ISO179, ISO180, GB/T1403, GB/T1483, GB/T8814 requirements on non-metallic specimen preparation;

Dimensions of the cutter:

A: 45 ±1 R0.25 / B: 45 ±1 R1 / C: 2 ± 0.2