Skip to content Skip to navigation
logo
Utest Material Testing Equipment

Electromechanical Universal Test Machine

Product Code

UTM-8050

Electromechanical Universal Test Machine,

50 kN, 220-240V, 50-60Hz, 1 ph.

UTM-8300

Electromechanical Universal Test Machine,

300 kN, 220-240V, 50-60Hz, 1 ph.

Standards

EN ISO 6892-1, EN ISO 15630-1 and 2, EN ISO 7500-1

UTM-8050, 50 kN and UTM-8300, 300 kN capacity fully automatic UTEST Electromechanical Universal Testing Machines are multi purpose versatile machines which satisfy the requirement of R&D laboratories, university laboratories, institute laboratories and quality control laboratories for tensile, compression flexural tests under load or displacement control for a wide range of materials. UTM 8050 and UTM- 8300 model Electromechanical Universal Testing Machines can be used for tensile test on any material i.e (metal, plastic, textile, wood) by using suitable accessories. Those machines can also be used for general compression, flexural, test on steel, soil, concrete, cement, asphalt and similar materials, by using suitable accessories.

These Testing Machines consist of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics data acquisition and control system. The upper cross head can be adjusted to set the vertical test space for different tests. User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single recirculating ball screw, powered by an servomotor.

Advanced closed loop control system assures accurate load or displacement pace rate on sample.

The load is measured by a load cell that located on upper crosshead and displacement is measured by an encoder fit to the servo motor on both models.

The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC.

The machine is supplied complete with high precision load cell. Gripping systems, extensometers and accessories are not included and have to be ordered separately.

Frame Features

 

UTM-8050

UTM-8300

Max. Load

50 kN

300 kN

Max. Vertical Test Space

(without accessories)

(Lower crosshead at

middle stroke.

 

650 mm

 

850 mm

Distance Between Columns

440 mm

630 mm

Crosshead Travel

400 mm

200 mm

Test Speed Range

0-100 mm/min.

0-75 mm/min.

Load Rate

0,001-2 kN/s

(Depend on specimen stiffness)

0,001-10 kN/s

(Depend on specimen stiffness)

Machine Class

 

Class 1 starting from

1% of the capacity

Class 1 starting from

1%of the capacity

Encoder Resolution

0.001mm

0,001 mm

Encoder Accuracy

0,01

0,01

Electrical Requirement

220-240V, 50-60Hz, 1 phase.

220-240V, 50-60Hz, 1 phase.

Overall Dimensions

1300x520x2300 mm

1100x450x1860 mm

Weight Approx.

400 kg

800 kg

UTM-8050 supplied with;

  • Compression Platens
  • Load Cells 50 kN Capacity

UTM-8300 supplied with;

  • Compression Platens
  • Load Cells 300 kN Capacity

ACCESSORIES

Electromechanical Universal Testing Machines are suitable for difference tests on various materials as Uniaxial Tests, Triaxial Tests, Steel Re-bars, Cement and Concrete, Soil (CBR), Asphalt (Marshall, Indirect Tensile, Duriez), Tiles, Flat Blocks etc. General Accessories;

  1. UTGM-0040 Load Cell, 5 kN Capacity
  2. UTGM-0042 Load Cell, 50 kN Capacity
  3. UTGM-0043 Load Cell, 300 kN Capacity
  4. UTM-0115 Compression Platens, used to perform uniaxial and unconfined compression tests.
  5. UTM-0500 Extensometer for universal testing machine, 50 mm gauge length, 10 mm travel (to use with max Ø:22 mm specimens)
  1. UTM-0520 Extensometer for universal testing machine, 50 mm gauge length, 100% strain feature,  standard temperature range: -40°C to +100°C (-40°F to 212°F).

Data Acquisition & PC Software

Digital display graphics data acquisition and control system are designed to control the machine and process the data from encoders, Load cells, installed on the Electromechanical Test Machine frame. It has graphical TFT display of 240x128 pixel and show both load and displacement. The digital unit sends all these information to PC and accepts commands of Start, Stop, and Test Speed etc.

Manual zeroing of all engineering values exist prior to the beginning of test.

Materials testing software is available for Utest UTM series universal testing systems. Test software provides fully customized parameter definition, test method development tools, automatic test control, data collection, results analysis, and reporting.

This flexable software solution supports multiple testing technologies and test types, allowing you to standardize your lab under a single software application. With several options for creating tests, and a separate application for running tests, you can allocate resources in the way that makes sense for your lab.

Advanced templates for testing to ASTM, ISO and EN standards for tension testing, compression testing, flexure testing, and more across a wide variety of materials and applications help ensure quick and efficient test setup and execution.

Up to 500 test methods can be managed at the same time in test  software and various engineering calculations performed automatically such as strain, tensile stress, compressional and flexural strength, elongation, yield point, elasticity modulus, absorbed energy, etc.

Test results stored in computer for your future retrieve or reanalysis and reporting. Data Exchange between other Windows based applications such as Excel, Word or output in PDF format.

MATERIAL

TEST/METHODS

STANDARDS

ACCESORIES

STEEL

(ROUNDS

AND FLATS)

Tensile Test under

Load/Displacement

Control

EN ISO 6892-1

UTM-8060 Tensile Grip complete with

grips for round specimens from 6 to 10

mm dia., and flats 0 to 15 mm thick., 50 kN

 

UTM-8310 Tensile Grips complete with

grips for round specimens from 6 to20 mm

dia., and flats 0 to 15 mm thick., 300 kN

 

 

 

 

 

 

 

 

 

 

 

CEMENT

AND

MORTARS

Compression Test

Under Load Control

EN 196-1

ASTM C109

UTCM-0121/E Compression Jig Assembly

EN, to test portions of 40x40x160 mm

mortar prism. (*)

 

UTCM-0121/A Compression Jig Assembly

ASTM, to test 50 mm (2") mortar cubes. (*)

Flexure Tests Under

Load Control

EN 196-1

ASTM C348

EN 12808-3

EN 1015-11

UTCM-0120/E Flexure Jig Assembly EN ,

to test 40x40x160 mm mortar prisms,

distance between lower bearers is 100 mm

 

UTCM-0120/A Flexure Jig Assembly ASTM,

to test 40x40x160 mm mortar prisms,

distance between lower bearers is 119 mm.

Tensile Adhesion

Strength (Adhesives

for tiles, repair,

rendering and

plastering.

EN 1346

EN 1348

EN 1015-12

EN 1542

EN12004

UTM-8070 Pull-Headed Plate Set for

EN 1348 and EN 12004

 

UTM-8080 Pull-Headed Plate Set for

EN 1015-12 and EN 1542

 

UTM-8082 Frusto-Conical Shaped Rings.

EN 1015-12, stainless steel, Ø50mm

 

UTM-8064 Holders for  Concrete  Base Plate and Specimen EN 1348, 1015-12, 1542 (**)

 

UTM-8074 Holders for Concrete  Base Plate and Specimen EN 1348, 1015-12. (**)

 

UTM-8084 Holders for Concrete  Base Plate and Specimen EN 1542 (**)

 

UTGM-0010 Load Cell 5 kN Capacity

UTGM-0015 Load Cell 10 kN Capacity

CONCRETE

Flexure Tests on

Concrete Beams

under Load Control

EN 12390-5

ASTM C78, C293

AASHTO T97

BS 1881:118

UTC-5501 Bearers, used for for 3 or 4 point flexural tests on concrete beams of 100x100x400-500 mm, 150x150x600-750 mm.

Flexure Tests on

Concrete Kerbs

Under Load Control

EN 1340

UTC-5502 Bearers, used for flexure test

on concrete kerbs. Consist of two lower

roller of 38 mm dia. x 600 mm length and

upper load point of 40 mm dia with ball

seating, 300kN

Splitting Tests

on Concrete

Cylindrical and

Cubes Specimens,

and concrete paving

blosks under Load

Control

EN 12390-6

AASHTO C496

EN 1338

UTC-0350 Splitting tensile test device for

100x200 mm (4" x 8"), 150x300 mm (6" x 12")

 

UTC-0360 Splitting tensile test device for

concrete cubes (EN)

 

UTC-0355 Splitting tensile test device for concrete paving blocks with

60-100x220 mm (hxl (EN)

(*) Up to the machine capacity

(**) Supplied complete with the connectiion appratus fit with the ordered machine.

CONCRETE

NATURAL

STONE

CLAY

Flexure Tests on Clay Roofing Tiles

EN 538

EN 491

UTC-5504 Flexural Testing Assembly with 610mm length rollers, used for flextural strenght  tests of concrete terrazo tiles,natural stone kerbs,  concrete paving flags and natural stone slabs. Consist of two lower roller and one upper roller of 38 mm dia. x 610 mm lenght. (10 kN loadcell should be ordered separately for concrete and ceramic tiles)

Flexure Tests on Natural Stone and Kerbs

EN 12372

EN 1343

Flexure Tests on Concrete Terrazo Tiles

EN 13748-1

EN 13748-2

Flexure Tests on Concrete Paving Flags

EN 1339

 

Flexure Tests on Slabs of Natural Stone for External Paving

EN 1341

 

Flexure Tests on Glass Fiber Reinforced Cement (Precast Concrete Products)

EN 1170-4

EN 1170-5

UTM-8095 Flexure Apparatus for EN 1170

Punching Tests for Clay Blocks

UNI 9730-3

UTM- 8090 Flexural Punching Device and Holding Plate

SOIL

CBR Under Displacement Control

EN 13286-47

ASTM D1883

AASTHO T193

UTM-0110 CBR Penetration piston, used to perform CBR tests.

Quick Triaxial Tests

BS 1377-8

ASTM D2850

ASSHTO- T245

See the table at next page

BITUMINOUS MIXURES

Marshal Test Under Displacement Control

EN 12697-34

ASTM D1559

UTAS-0057 Breaking Head Stability Mould, cast iron, for 4" (101,6 mm) Marshall Samples

 

UTAS-0058 Breaking Head Stability Mould, cast iron, for 6" (152,4 mm) Marshall Samples

Indirect Tensile Splitting Tests

EN12697-23

AASHTO T283

UTAS-0063 Tensile Splitting Device for compacted Bituminous samples 100 mm (4") & 150 mm (6") dia.

Duriez Test Under Displacement Control

NF P98 251 1/4

EN 12697-12  Method A and B

UTAS-0090 Duriez Compression Test Set, 80 mm diameter. Only with UTM-8300

 

UTAS-0092 Duriez Compression Test Set, 120 mm diameter. Only with UTM-8300

INSULATION MATERIALS

Tensile strength

and tensile bond strength perpendicular to faces

EN 13494

EN 1607

Determination of tensile strength perpendicular to  faces and the tensile bond strength of the adhesive and of the base coat to the thermal insulation materials,

 

UTM-8121 Tensile-Headed Solid Plate Set,

50x50x5mm.

 

UTM-8122 Tensile-Headed Solid Plate Set, 100x100x5mm.

 

UTM-8123 Tensile-Headed Solid Plate Set, 150x150x5mm.

 

UTM-8124 Tensile-Headed Solid Plate Set, 200x200x5mm.

 

UTM-8125 Tensile-Headed Solid Plate Set, 300x300x5mm.

Typical configuration of system for different tests (UU-CU-CD)

Product Code

Description

UU

UU-CU-CD

UTM-0108

Multiplex Universal Electromechanic Test Machine*

1

1

UTGM-0010

Load Cell 5 k N

1

1

UTS-0400

UTS-0401

Triaxial Cell**

1

1

UTS-0405

Block with One Connection Line for Triaxial Test Cells,

1

-

UTS-0406

Block with 3 Connection Lines for Traxial Test Cells

-

1

UTGM-0110

Pressure Transducer

1

3

UTS-0408

Oil and Water Constant Pressure System

1

2

UTS-0415

Automatic Volume Change Unit

-

1

UTG-0320

Static Unilogger4 Channels

-

1

UTS-0416

Software to Perform UU Triaxial Tests

1

1

UTS-0417

Software to Perform CU-CD Triaxial Tests

-

1

UTS-1330 and

UTGP-1140

De-Airing Water Tank, 7 L. and Hose

1

1

*Supplied complete with UTGM-0025 50 kN Load Cell, UTGM-0062 25 mm Linear Potentiometric Transducer and UTC-4930 BC 100 Data Acquisition and Control Unit.

**Choose the suitable cell for the specimen size (UTS-0400: 38-50 mm dia. samples / UTS-0401: 70-100 mm dia. samples).  For cell accessories, sample prepatarion accessories and Optional apparatus for de-airing water please see Triaxial Test Systems.