Skip to content Skip to navigation
logo
Utest Material Testing Equipment

Servo Controlled Wide Test Space Electromechanical Universal Test Machine, 10 kN

Product Code

UTM-8020

Wide Test Space Electromechanical Universal

Test Machine, 10 kN, 220-240V, 50-60Hz, 1 ph

Standards

EN 10545-4, 538, 491, 1346, 1348, 12004, 1015-12, 1542, 13748-1, 13748-2

UTM-8020, 10 kN Capacity UTEST Electromechanical Universal Testing Machines are multi purpose versatile machine. Used for flexural breakıng load and modulus of rupture tests  of ceramic floor and wall tiles and breaking strength test of clay or concrete roofing tile, terrazo tiles and also for tensile adhesion and tensile bond strength tests of adhesives for tiles, mortar for masonry and products for the protection and repair of concrete structures  under load control by using suitable accessories up to the machine capacity.

The Testing Machine consist of base containing the transmission components and holds two robust columns connected by upper cross head and LPI Battary Operated Digital Readout Unit. The upper cross head can be adjusted to set the vertical test space for different tests. The load is measured by a load cell that located on upper crosshead. The Machine can perform test  with displacement  and load control.

Suitable accessories and different capacity loadcells  should be ordered separately acc.to the test performed. The load is measured by a load cell that located on upper crosshead. The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC.

Suitable accessories and different capacity loadcells  should be ordered separately acc.to the test performed.

UTM-8020 supplied with 10 kN Capacity Load Cells

Frame Features

Max. Load

10 kN

Machine Class

Class 1 starting from 1% of the capacity

Max. Vertical Test Space

(without accessories)

(Lower crosshead at middle stroke.

Min. 200mm

Max. 400 mm

(without accessories)

Distance Between Columns

850 mm

Stroke

100 mm

Test Speed Range

0,001-50 mm/min.

Load Rate

10-300 N/s

(Depend on specimen stiffness)

Electrical Requirement

220-240V, 50-60Hz, 1 phase.

Overall Dimensions

900x970x1120 mm

Weight Approx.

320 kg

MATERIALS

TESTS/METHODS

STANDARDS

ACCESSORIES

Ceramic Tiles

Flexure, Bending

and Breaking

Strength Tests

EN 10545-4

UTM-8012 Flexural Testing Assembly,

for UTM-8010 and UTM-8020. Consist of

two upper rollers and two lower rollers

820 mm length and 20 mm dia.

Concrete and

Clay Products

EN 538

EN 491

EN 13748-1(*)

EN 13748-2(*)

 

Adhesives for

Tiles, Mortar

for Masonry

and Products

for

The Protection

and Repair Of

Concrete

Structures

Tensile

Adhesion/Bond

Strength

EN 1346

EN 1348

EN 12004

EN 1015-12

EN 1542

UTM-8070 Pull-Headed Plate Set for

EN 1348 and EN 12004

 

UTM-8080 Pull-Headed Plate Set for

EN 1015-12 and EN 1542

 

UTM-8082 Frusto-Conical Shaped Rings.

EN 1015-12, stainless steel, Ø50mm

 

UTM-8064 Holders for  Concrete  Base Plate and Specimen EN 1348, 1015-12, 1542 (**)

 

UTM-8074 Holders for Concrete  Base Plate and Specimen EN 1348, 1015-12. (**)

 

UTM-8084 Holders for Concrete  Base Plate and Specimen EN 1542 (**)

 

UTGM-0010 Load Cell 5 kN Capacity

(*) Up to the machine capacity

(**) Supplied complete with the connectiion appratus fit with the ordered machine.