Skip to content Skip to navigation
logo
Utest Material Testing Equipment

Flexural Testing Accessories

Product Code

UTC-5501

Flexural Testing Assembly

for Concrete Beams, Set of 2 upper and 2 lower

rollers of 38 mm dia and 160 mm length

UTC-5502

Flexural Testing Assembly

for Concrete Kerbs, Set of 2 lower

roller of 38mm dia.x620mm lenght and upper

load point of 40 mm dia with ball seating

UTC-5504

Flexural Testing Assembly,

Set of 2 lower and 1 upper

roller of 38 mm dia.and 620 mm lenght.

UTC-5506

Auxiliary Testing Frame

for The Measurement of Deflection

on Concrete Beams with 2 pcs.

Linear Potentiometric Displacement Transducer

UTC-5507

Auxiliary Testing Frame

for The Measurement of Deflection

on Beams with 2 pcs.

High Accurate Displacement Transducer

UTCM-1116

Upper Platen with Ball Seating Assembly

Ø165 mm and Lower Platen Ø165 mm

UTC-5510

Distance Piece (Ø165 mm x 20 mm thick)

for Flextural Testing Frame

Standard

EN 1338, 1339, 1340, 12390-5, 12390-6; BS 1881; ASTM C78, C293, C496, UNI10834

UTC-5501 Flexural Testing Assembly for Concrete Beams

The test assembly, conforming with EN 12390-5, ASTM C78, ASTM C293, BS 1881:118, is used for center or two-point (third-point loading-ASTM) loading flexural tests on 100 mm or 150 mm concrete beams.

Can be used with all UTEST flexural testing frames. The distance of lower rollers can be adjusted between 100 mm to 800 mm. The distance between upper rollers can be set to 100 mm or 150 mm. For  center-point loading flextural test one of the rollers can be removed and the other placed in the center. The rollers dimensions are 38 mm dia.x 160 mm length.

Dimensions

200x200x200 mm

Weight (approx.)

16 kg

UTC-5502 Flexural Testing Assembly for Concrete Kerbs

The testing assembly, conforming with EN 1340, is used for flexural tests on concrete kerbs. The set consists of two lower rollers 38 mm dia. x 620 mm long and 40 mm dia. upper loading piston with ball seating assembly.

Can be used with all UTEST flexural testing frames. The distance of lower rollers can be adjusted between 100 mm to 800 mm. 

Dimensions

620x250x100 mm

Weight (approx.)

17 kg

UTC-5504 Flexural Test Assembly

UTC-5504 Flexural Testing Assembly consist of two lower rollers and one upper  roller of 38 mm dia. and 620 mm length is used for flexural tests on concrete paving flags and concrete terrazo tiles, natural stone kerbs and slabs. The distance of lower rollers can be adjusted between 100 mm to 800 mm. Conform with EN 1339, EN 1343, EN 12372.

For the samples with low strenght 10 kN loadcell connection flange and  adaptor for the load cell should be orderd seperately .

Dimensions

620x260x150 mm

Weight (approx.)

25 kg

UTC-5506 & UTC-5507 Auxiliary Testing Frames for The Measurement of Deflection on Concrete Beams

The Auxiliary testing frame is used for the measurement of deflection during the flexure test on 100x100x400/500 mm and 150x150x500/600 mm beams conforming to ASTM C1018.

The auxiliary testing frames can be used on all UTEST flexural testing frames.

For displacement controlled test, UTC-5507 Auxiliary testing frames with high accurate displacement transducers should be used with UTC-4850 or UTC-4860 advanced servo controlled automatic power packs with proportional valve units or UTC-4870 advanced servo controlled automatic power pack with servo valve.

For load controlled test, UTC-5506  Auxiliary testing frames with linear potantiometric displacement transducers or UTC-5507  Auxiliary testing frames with high accurate displacement transducers should be used with any UTEST servo controlled or automatic power packs.

UTC-5506 Auxiliary Testing Frame is supplied complete with 2 pcs. linear potantiometric displacement transducers (10mm x0,001mm UTGM-0060) and UTC-5507 Auxiliary Testing Frame is supplied complete with 2 pcs. high accurate displacement transducers (10mm x0,001mm UTGM-0072).

UTC-5501 Flexural Test Assembly for concrete beams should be ordered separately.

Dimensions

500x250x100 mm

Weight (approx.)

4 kg

Spilitting Tensile Test for Concrete Paving Blocks and Compressive Strength Test with Flexural Testing Frames

The test assembly is used to perform spilitting tensile test for concrete paving blocks and compressive strength tests with the Utest flexure testing frames.

The set consists of UTCM-1116 Upper Platen (with spherical seating assembly) Ø165 mm and Lower Platen Ø165 mm and UTC-5510 Distance Piece (Ø165 x 20 mm thick). For the spilitting tensile test for concrete paving blocks (EN 1338), splitting tensile test device (UTC-0355) should be ordered separately.

For the compressive strength test, depending on the height of the specimens to be tested, Ø165 mm distance pieces (15 mm: UTC-4630, 30 mm:UTC-4631, 50 mm: UTC-4633, 90 mm: UTC-4634) should be ordered separately.

 

Dimensions

Weight (approx.)

UTCM-1116

170x170x145 mm

9 kg

UTC-5510

210x210x30mm

2 kg

UTC-0355

240x160x320 mm

17,5 kg

UTC-4630

165x285x20 mm

2,5 kg

UTC-4631

165x285x35 mm

5 kg

UTC-4633

165x285x55 mm

8 kg

UTC-4634

165x285x95 mm

14 kg