Skip to content Skip to navigation
logo
Utest Material Testing Equipment

Capacity Flexural Frame Column Type

Product Code

UTC-5800 600 kN Capacity Flexural Frame Column Type

Standard

EN 1338, 1339, 1340, 12390-5, 12390-6; ASTM C78, C293, C496

UTEST 600 kN capacity Flexural Frame is  designed for minimum de­flection at maximum load resulting in very high accuracy. The load frame is a four column design  carrying the ram fitted to the upper crosshead. The frames has a double acting  stroking ram with over travel switch pro­tection to shut the machine down when maximum ram travel is reached. A load cell is used for load measurements on the  frame.

UTEST 600 kN capacity Flexural Frame is designed to accept all accessories required for flexural, transverse or compression tests.

The load frame provides the stability needed for accurate and repeatable test results over the years of operation.

UTEST 600 kN capacity Flexural Frame can be connected to any UTEST compression machine as a second frame or can be used with any UTEST power pack as an independent Flexural Machine.

Flextural test assemblies should be ordered seperately.

The main characteristics are:

  • High stability four column design
  • 350 mm piston stroke with safety limit switch
  • High accuracy load measurement with strain gauge load cells
  • Can accept wide range of accessories for mentioned standards
  • The distance between lower rollers can be set up to 1400 mm
  • Can be connected to any UTEST compression machine or UTEST power pack

Capacity

600 kN

Ram Travel

350 mm

Max. Vertical Clearance

930 mm (without accessories)

Max. Horizontal Clearance

640 mm

Max. Clerance Between  Lower Rollers

2000 mm

Overall Dimensions

1100x2000x2650 mm

Weight (approx.)

2750 kg