Skip to content Skip to navigation
logo
Utest Material Testing Equipment

Ductility Testing Machines

Product Code

UTAS-0400

Ductility Testing Machine,

220-240 V 50-60 Hz

UTAS-0420

Ductility Testing Machine with Cooling Unit,

220-240 V 50-60 Hz

UTAS-0430

Force Ductility Testing Machine, EN 13589,

220-240 V 50-60 Hz

UTAS-0402

Ductility Briquette Mould,

ASTM D113 and AASHTO T51

UTAS-0404

Ductility Mould Base Plate

UTAS-0406

Ductility Mould, ASTM D6084,

AASHTO T300 and EN13589

(force measurement ), Brass

UTAS-0408

Ductility Mould, EN 13398

Standards

UTAS-0400 and

UTAS-0420 : EN 13398; ASTM D113, D6084; AASHTO T51

UTAS-0430 : EN 13589, 13398, 13703; ASTM D113, D6084;

AASHTO T51, AASHTO T300

The UTAS-0400 Ductility Testing Machine is used to determine theductility of bituminous materials in a briquette mould by measuring the breaking elongation at a constant speed of 50 mm/min. It is designed for testing 4 specimens simultaneously. The Internal tank is made of stainless steel. The bath is fitted with an immersion heater in order to obtain (in normal conditions), the 25°C test temperature.

Each machine comprises speed control and water circulator to maintain the homogenous water temperature.

The UTAS-0420 Ductility Testing Machine with Cooling Unit has the same specifications with UTAS-0400 Ductility Testing Machine but with an additional cooling unit and  It is not possible to convert UTAS-0400 to UTAS-0420.

UTAS-0430 Force Ductility Testing Machine has 4 loadcells. The accuracy of loadcells are ±0,1N with a maximum capacity of 300 N. The UTAS-0430 has a cooling unit UTAS-0430 model is equipped with BC 100 TFT Graphic Display Automatic Control and Data Acquisition Unit. Failure condition can be down loaded to the Unit. Speed can be set and load-displacement curves are drawn through the software.

  • Elongation measurement  through motor encoder.
  • 4 simultaneous load measurement with18 bit resolution.
  • Speed contol with servo AC motor between 0,01 to 100 mm/min.
  • Ethernet connection for computer interface.

Moulds and mould base plates should be ordered separately for all type machine.

Dimensions

300x1850x550 mm

Weight (approx.)

80 kg

Power

350 W