Skip to content Skip to navigation
logo
Utest Material Testing Equipment

Automatic Digital Bitumen Penetrometer

Product Code

UTAS-0126

Automatic Digital Bitumen Penetrometer

220-240V 50-60 Hz

UTAS-0121

Transfer Dish for UTAS-0120

UTAS-0122

Sample Cup, Ø 55x35 mm, stainless steel

UTAS-0123

Sample Cup, Ø 70x45 mm, stainless steel

UTAS-0124

Penetration Needle, 2,5 g

Standards

EN 1426; ASTM D5; AASHTO T49

The UTAS-0126 Automatic Electronic Penetrometer is used for determination of the needle penetration according to EN 1426, ASTM D5 and AASHTO T49 standards. The penetration depth of the needle is determined with a pulse type electronic measuring system, which is separated from the plunger during the test, this allows the free  guidance of the plunger which virtually eliminates friction during the test.

Before each start of the test the measuring system automatically resets, and then the penetration needle moves down to the sample by using the electric drive, the needle position can be finely adjusted by using the joystick located on the front panel. A magnifying glass and an ultra- bright LED lamp are supplied to assist the operator; the plunger is then automatically released onto the sample and raised automatically after the testing period. The test result is displayed on the digital display. The plunger can easily be removed to calibrate its weight.

A water bath (UTGE-4000 or UTGE-4050, 25±0.1°C) and a thermometer (IP38, ASTM 17C or 63C) required for the test are ordered separately.

The Automatic Electronic Penetrometer is supplied complete with;

  • Penetration Needle, 1 piece
  • Transfer Dish
  • Sample Cup, Ø 55x35 mm, 6 pieces, stainless steel
Technical Specifications

Measuring Range

0-50 mm

Resolution

0.01 mm

Test Load

100 g (plunger 97.5 g + 2.5 g penetration needle)

Test Time

5 seconds (adjustable from 0.1 to 9999 sec.)

Dimensions

270x480x750 mm

Weight (approx.)

24 kg

Power

75 W